Description
Product Description
SUNLU Standard Resin je UV fotopolimerna smola za 3D tisk, zasnovana za natančno reprodukcijo detajlov, gladke površine in zanesljivo tiskanje. Smola se hitro utrjuje, ima nizko krčenje in omogoča dobro dimenzijsko stabilnost natisnjenih modelov.
Applications
Primerna je za tiskanje figuric, modelov, prototipov, dekorativnih predmetov in drugih delov, kjer so pomembni dobra kakovost površine, natančnost in jasni detajli. Zaradi stabilnega tiskanja je primerna tako za začetnike kot izkušene uporabnike.
Key features and technical information
- Tip smole: UV fotopolimer za LCD/DLP/MSLA tiskalnike
- Valovna dolžina: 365–405 nm
- Excellent fluidity and low viscosity for stable and reliable printing
- Low shrinkage and high dimensional stability
- Visoka natančnost in dobra reprodukcija detajlov
- Gladke površine natisnjenih modelov
- Hitro UV utrjevanje
- Združljiva z večino 405 nm LCD/MSLA/DLP 3D tiskalnikov
- Packaging: 1000 g
Recommended print settings
- Light wavelength: 405 nm
- Layer thickness: 0.03–0.05 mm
- Bottom layers: 3–5
- Bottom exposure time:
- LCD (non-monochrome screens): 30–80 s
- MSLA (monochrome screens): 20–60 s
- Normal layer exposure time:
- LCD (non-monochrome screens): 4–15 s
- MSLA (monochrome screens): 1.5–3 s
- Light-off delay: 0,5–1 s
- Lifting height: 6-10 mm
- Lifting speed: 60–120 mm/min
- Lowering speed: 150–200 mm/min
- Optimal printing temperature: 25–30 °C
- Post-curing: 3–5 minutes of UV curing for maximum strength
Navedene nastavitve so priporočene začetne vrednosti. Optimalni časi osvetlitve so odvisni od modela tiskalnika, barve smole, višine sloja in drugih nastavitev tiskanja.
Safety Information
Signal word: Warning
Hazard statements (H):
H315 – Causes skin irritation.
H317 – May cause an allergic skin reaction.
H319 – Causes serious eye irritation.
H412 – Harmful to aquatic life with long-lasting effects.
Precautionary statements (P):
P261 – Avoid breathing vapors or mist.
P264 – Wash hands and exposed skin thoroughly after handling.
P280 – Wear protective gloves / eye protection / face protection.
P302+P352 – IF ON SKIN: Wash with plenty of water and soap.
P333+P313 – If skin irritation or rash occurs: Get medical advice/attention.
P305+P351+P338 – IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.
P337+P313 – If eye irritation persists: Get medical advice/attention.
P501 – Dispose of contents/container in accordance with local regulations.
Additional Information:
Avoid direct contact with liquid resin.
Use in a well-ventilated area.
Store in a cool, dry place away from light.
Ne izpostavljati sončni ali UV svetlobi pred uporabo.
Mnenja
Zaenkrat še ni mnenj.