Description
Product description
The XH2.54 stepper motor cable (4-pin to 6-pin)** is designed for connecting motors such as NEMA 17 to controllers and drivers (e.g. A4988, TMC2208, TMC2225, StepStick, etc.). The cable features a 4-pin XH2.54 connector on the motor side and a 6-pin XH2.54 connector on the driver side. With a total length of approximately 150 cm, it is ideal for 3D printers, CNC machines, robotic systems, and other projects that use stepper motors.
Specifications
- Type: Connection cable for stepper motors
- Motor connector: XH2.54 4-pin
- Driver connector: XH2.54 6-pin
- Cable length: 150cm
- Compatible: NEMA 17, NEMA 23
- Application: 3D printers, CNC machines, robotics
⚙️ !Important!
Before connecting check the wiring and pin layout on the controller board and the stepper motor, as not every motor is wired the same – the wire sequence may differ between manufacturers or models. If the pin order does not match, you can easily adjust the position of individual wires: use a small screwdriver to press the latch inside the connector, remove the contact, and insert it into the correct position.
Mnenja
Zaenkrat še ni mnenj.