Description
Product Description
SUNLU Standard Plus Resin is an upgraded version of the standard resin, designed for higher precision, improved strength, and easier printing performance. It delivers smooth surface quality, fine details, and excellent layer adhesion. The resin cures quickly, produces minimal odor, and is safe for indoor use.
Applications
Perfect for printing figures, models, prototypes, decorative items, and other projects where a combination of aesthetics, dimensional accuracy, and basic mechanical strength is important. Due to its low shrinkage and stable performance, it is suitable for both beginners and experienced users.
Key features and technical information
- Resin type: UV photopolymer for LCD/DLP/MSLA printers (wavelength 365–405 nm)
- Excellent fluidity and low viscosity for stable and reliable printing
- Improved toughness – less brittle than standard resins
- Low shrinkage and high dimensional stability
- High printing precision and smooth surface finish
- Low odor and low irritation
- Compatible with all 405 nm LCD and MSLA 3D printers (Anycubic, Elegoo, Creality, Phrozen, etc.)
- Packaging: 1000 g
Recommended print settings
- Light wavelength: 405 nm
- Layer thickness: 0.03–0.05 mm
- Bottom layers: 3–5
- Bottom exposure time:
- LCD (non-monochrome screens): 30–80 s
- MSLA (monochrome screens): 20–60 s
- Normal layer exposure time:
- LCD (non-monochrome screens): 4–15 s
- MSLA (monochrome screens): 1.5–3 s
- Light-off delay: 0,5–1 s
- Lifting height: 6-10 mm
- Lifting speed: 60–120 mm/min
- Lowering speed: 150–200 mm/min
- Optimal printing temperature: 25–30 °C
- Post-curing: 3–5 minut UV utrjevanja za dosego maksimalne trdnosti
Safety Information
Signal word: Warning
Hazard statements (H):
H315 – Causes skin irritation.
H317 – May cause an allergic skin reaction.
H319 – Causes serious eye irritation.
H412 – Harmful to aquatic life with long-lasting effects.
Precautionary statements (P):
P261 – Avoid breathing vapors or mist.
P264 – Wash hands and exposed skin thoroughly after handling.
P280 – Wear protective gloves / eye protection / face protection.
P302+P352 – IF ON SKIN: Wash with plenty of water and soap.
P333+P313 – If skin irritation or rash occurs: Get medical advice/attention.
P305+P351+P338 – IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.
P337+P313 – If eye irritation persists: Get medical advice/attention.
P501 – Dispose of contents/container in accordance with local regulations.
Additional Information:
Avoid direct contact with liquid resin.
Use in a well-ventilated area.
Store in a cool, dry place away from light.
Do not expose to sunlight or UV light before use.
Mnenja
Zaenkrat še ni mnenj.