CRAFTRUM PLA HS

PLA High speed filament 1.75mm

• Net weight 1kg
• PLA High Speed filament by CRAFTRUM is designed for fast 3D printing
• Recommended printing temperature 190°C to 240°C, depending on the printing speed
• The recommended print bed temperature is 60°C
• The cooling fan can be set to 100% for optimal results
• It prints overhangs excellent and has minimal shrinkage
• The filament is precisely wound on cardboard spools (outside diameter 20cm, inside diameter 5.3cm, width of spool 6cm).
• The cardboard spools can be easily disassembled by removing the front and back sides, allowing them to be used on reusable spools. The inner diameter of the cylinder is 75mm.

Recommended Settings for Bambulab X1C and X1P (for best quality prints):

• Nozzle Temperature: first layer 220°C, remaining layers 200°C (except for the PLA HS white: all layers 220°C)
• Bed Temperature  (textured PEI plate): 60°C
• Retraction Length: 0.5 mm
• Wipe Distance: 0mm (off)
• Part Cooling Fan: Minimum 50%, Maximum 100%, First Two Layers 0%
• Auxilliary Fan: 50%
• Flow Ratio (Extrusion Multiplier): 0.96-0.98
• Maximum Volumetric Speed: 15 – 18 mm³/s
• K-Factor (Pressure Advance): 0.015
• Ironing Flow:  30%
• Ironing Speed: 50mm/s